Tek Fixings
Steel to Steel
| Fixing Graphic | APPLICATION | EJOT Product Code | HILTI Product Code |
| General fixing for studs / tracks / bracing. Combined thickness up to 3.0mm. Low profile P2 head screw. |
JT2 NH3 - 5.5 x 19 | S-MD01ZW - 5.5 x 19 | |
| General fixing for studs / tracks / bracing. Combined thickness up to 6.0mm. Low profile 8mm Hex head screw. |
JT2 LH6 - 5.5 x 22 | N/A | |
| General fixing for studs / tracks / bracing. Combined thickness up to 3.0mm. Low profile P2 head screw. |
LSCF 5.5 x 25 | S-MD03ZW 5.5 x 25 | |
| General fixing for studs / tracks / bracing. Combined thickness 4.0mm up to 12.5mm. 8mm Hex head screw. |
HS 5.5 x 38/55/65/76/100 | S-MD05Z 5.5 x 40 | |
| General fixing for studs / tracks / bracing. Combined thickness 4.0mm up to 12.5mm. Low profile P2 head screw. |
HSCF 5.5 x 38 | S-MD05zw 5.5 x 40 |
Steel to Timber
| Fixing Graphic | APPLICATION | EJOT Product Code | HILTI Product Code |
| Fixing 0.5mm to 1.2mm steel to timber. Course twin thread. (Clearance hole required in steel above 0.9mm thick) |
TS 6.3 x 45 | N/A |
Steel to Concrete
| Fixing Graphic | APPLICATION | EJOT Product Code | HILTI Product Code |
| Fixing 1.2mm to 4.0mm steel to concrete. Carbon Steel (requires 5mm pilot hole) |
4H 6.3 x 32/45 | N/A | |
| Fixing 1.2mm to 4.0mm steel to concrete. Stainless Steel (requires 6mm pilot hole) |
4H Stainless 7.5 x 45 | N/A | |
| Fixing 1.2mm to 4.0mm steel to concrete. Zinc Plated Steel (requires 6mm pilot hole) |
N/A | HUS 6 x 35/45/60/80/100 |
Board to Steel
| Fixing Graphic | APPLICATION | EJOT Product Code | HILTI Product Code |
| Chipboard, ply, OSB or Cement Particle boarding to steel sections 0.9mm to 3.0mm thick. |
TBF 4.8 x 30/45/66 | S-WD 12Z 5.5 x 50 | |
| Timber battens or cement particle boarding to steel sections 1.2mm to 3.0mm thick. |
WDLS 5.5 x 50/65/85/100/127 | ||
| Single layer plasterboard to steel studs from 4.0mm to 10.0mm steel build up. |
WDHS 5.5 x 65 | S-WD 15Z 5.5 x 65 | |
| Fixing timber battens or Cement Particle boarding to 4.0mm to 10.0mm steel. | WDHS 5.5 x 65/85/119 | S-W15C 5.5 x 85/119 |
Share This Page:
